Anyone finished a guitar with tru oil? Ok bagman, if you don't mind, can you please take the op's sequence and show where the 320 goes, and what's ok as is:
99 best All Things Shooting images on Pinterest
If there are little white streaks in the wax, then you've either got rough spots in the wood surface (unfilled wood pores) or just an excessive buildup of the wax on the surface that.
Tru oil gun stock finish guitar. It does come in a couple colors, but i just buy the clear (it looks amber straight out of the bottle). Unlike some other products, it’s not. After cure i wetsanded up to 1000 grit and polished with pumice and rottenstone.
I have sprayed nitro and it looks great. A small can of polyurethane would do the job with one coat. Discussion starter · #1 · jan 19, 2015.
On april 6, 2013 april 7, 2013 so i took an empty bottle and mixed about 90% tru oil and 9.9% mineral spirits with a few drops of japan drier. Applied a coat with fingers and let it dry for 24 hours. True oil will require a few coats over raw wood to give adequate protection.
This is where things can get made complicated but don’t need to be. Either would be fine under tru oil as long as you let it dry completely (i'd give it 24 hours after the last application before your first coat of tru oil). Headstock face, headstock back, hang the guitar on the hanger, do the neck, sides, then the back, then the front.
I went through a lot of grief discovering this the hard way. A bottle of truoil will do a bunch of guitars, unless you are putting on a finish deep enough to dive into. If you go with stain, it may or may not be compatible with tru oil.
It builds up layers and if you desire, you can achieve a high gloss finish. Guitar, or another small woodworking project. If it is a “new rifle” look that you're wanting, nothing short of a pro spray gun will deliver the effect.
Its unique blend of linseed and other natural oils dries fast, resists water damage and will not cloud, yellow or crack with age. True oil is a gun stock finish so the directions are meant for people that want to put it on a gun. Repeat step 1 and 2 numerous times.
You are putting the finish on raw wood. Use the gloves to squeegee the surface of the body of excess oil. The task of road proofing this guitar took me a couple of days only because i was not on a time budget.
Stain usually has other additives in addition to color, like urethane or varnish of some kind, or oil. It will soak in quickly. There are only three steps to a great finish on a gun stock.
#4 · oct 24, 2009. Let the wax dry and buff to bring out the sheen. Excellent as a sealer for under butt plates, recoil pads and in inletted actions to prevent stock damage.
Ive already done the final coating and ive done everything i want to it , but i just cant find any info on this particular subject. It was my third build. Last step was to finish seal it with a coat of watco's satin wax (the same as the birchwood casey gun stock wax).
The finish hardens and protects just like the finishes of vintage guitars. Polyvinyl and urethane finishes are much more durable but they are also prone to. I didn't really like how the finish turned out.
I have sanded and added a thin coat with. Im gonna say wait like 2 days or so after the last coat but id just like to be safe and ask. There also seems to be a lot of confusion about it too.
The finish was hard so i sanded again and applied coat two. But i need to wax it. So ive got this soloist body (dont worry ill post pics of it hahah) its mahogany with a koa top.
Once you have it smooth don't touch it again as you will leave marks. Auto compounds can also be used during the polishing stage. If you apply to a perfectly slick surface, you actually increase the likelihood of finish failure.
Originally developed as a gunstock finish, it’s relative ease of application, decent durability, and grain enhancing properties, have won it a lot of favor among guitar finishers. I have found that i get the best results when iwipe a small amount over the whole guitar then.
Результат поиска Google для
Why You Should Be Using TruOil Tru, Oils, Being used
Pin on Custom Guitars
Pin on My woodworking
Pin on My woodworking
407 best Gun Smithing/Cleaning images on Pinterest